Rotomaxx CX Low-Speed Mixer | High Torque Mixer
Specifications | Options | Datasheet
The Rotomaxx is a low-speed right angle mixer designed to meet your requirements for high flow rate and high torque, capable of processing up to 10,000 gallons at viscosities up to 10,000 CPS for large volume mix and holding tanks. Rotomaxx features a 304SS gearbox, bearing frame and motor. Various options are available including mounting plates, explosion proof packages, inverters, mechanical seals and others.
Key Features
- Drives are 0.5 to 3 Hp, 30 – 350 RPM output with a minimum 1.5 service factor
- Motors are 300 series stainless steel or a wash down duty white epoxy finish or TEXP
- Small footprint and headroom requirement
- 3-A compliant pedestals are available
- Total washdown capability
How it Works
The principle of operation for the Rotomaxx high torque mixer is similar to Admix’s Rotomixx portable agitator and other top-entry agitators whereby a motor provides power to drive a shaft, and a bearing frame provides support for the motor, coupling and shaft. At the end of the shaft there is a device for pumping fluid, typically an impeller consisting of 3 blades attached to a central hub. The combination of the speed of the shaft rotation and the orientation and type of blades pump the fluid or liquid into which the impeller is immersed.
The mixing impeller is the heart of the Rotomaxx mixer and its success in promoting high flow and rapid mix times. Standard Rotomaxx units use our Jetfoil™ impeller, providing superior axial pumping rates with minimal power usage. Custom impellers are available to suit specific applications.
As a rule of thumb, the Jetfoil provides TWICE the flow rate and tank turnovers at a given horsepower as compared to conventional pitched blade agitators.
Our application engineers are happy to recommend a creative solution for your mixing challenge. Get a free customized quote today.