Admixer™ Specifications
Overview | How it Works | Options | Datasheet
Model | Nominal Diameter (IN./MM) |
Flow Rate (GPM/LPM) | I.D. (IN./MM) | Pressure Rating @ 300°F (PSI) |
Length (IN./MM) | Approx. Weight (LBS./KG) |
SAN1-6R-S | 1 / 25 | 1 – 15 / 4 – 57 | 0.87 / 22 | 250 | 8.75 / 222 | 1 / .45 |
SAN1.5-6R-S | 1.5 / 38 | 3 – 30 / 11 – 114 | 1.37 / 35 | 250 | 13 / 330 | 2 / .90 |
SAN2-6R-S | 2 / 51 | 5 – 50 / 19 – 189 | 1.87 / 47 | 250 | 17.25 / 438 | 5 / 2.3 |
SAN2.5-6R-S | 2.5 / 64 | 10 – 80 / 38 – 302 | 2.37 / 60 | 200 | 21.75 / 552 | 8 / 3.6 |
SAN3-6R-S | 3 / 76 | 20 – 150 / 76 – 567 | 2.87 / 73 | 150 | 26 / 660 | 12 / 5.4 |
SAN4-6R-S | 4 /102 | 50 – 250 / 189 – 946 | 3.83 / 97 | 150 | 34.5 / 876 | 20 / 9 |
The following Technical Reports are available for understanding and applying the Admixer static technology.
Tech Notes
#101 – Admixer Theory of Operation
#102 – Sizing the Admixer
#105 – Gas Blending
Processing Reports
#201 – Sanitary Static Blending with the Admixer
Admixer Characteristics
Mixing Action | Plug Flow |
Viscosity Range | 1 to 1,000,000 cps |
Viscosity Ratio | 10,000:1 |
Volumetric Ratio | 10,000:1 |
Density Ratio | 100:1 |
Shear Rate | Low, but uniform (up to 10³ sec²) |
Velocity Dependency | Laminar Flow – None Turbulent – 1 ft/sec minimum |
Dispersion Capability | Good to Very Good |
Pressure Drop | Low (1 to 5 feet / .3 to 1.52 meters) |
Maintenance | Low |
Injection Requirements | Very Important Especially at High Viscosity or Volumetric Ratios |
Energy Cost | Low (25% of Dynamic Mixers) |
Capital Cost | Low |